Sheet 1 – Hookup Instructions
Place near front of trailer
- Cross the safety chains in an X pattern
- Plug in the 7-pin wiring harness and test all lights + turn signals
- Confirm your truck has a working brake controller
- Lock the coupler and insert the safety pin
Sheet 2 – Battery & Electric Dump
- Check battery charge before every trip
- Turn on the power switch before operating the dump
- Charge the battery fully after each rental
- Do not run the dump motor if battery is low
Sheet 3 – Load & Dump Rules
- Never exceed 3,000 lbs
- Never load more than two-thirds full with heavy material
- Load must be completely covered with a tarp
- Clean the trailer completely after dumping
Sheet 4 – Inspection Walkthrough
Use with the Inspection Checklist
- At pickup: walk tires, lights, dump up/down, battery charge, coupler, chains, frame, and bed with the owner
- Confirm 5×10 electric dump identity and note any existing marks
- At return: trailer clean and empty, battery ≥50%, no new damage, tarp/locks returned
- Print the Inspection Checklist and keep a signed copy